Sony SRXR320P Brochure page 14

Specifications of SRX-R320
SXRD Device Main Specifications
Display device SXRD (Silicon X-tal Reflective Display)
Size 1.55-inch (diagonal)
Resolution 4096 (H) x 2160 (V) pixels
Contrast More than 4000:1
Pixel pitch 8.5 μm
Width (between pixels) 0.35 μm
Response speed 2.5 ms (for both rise and fall)
Liquid crystal mode Normally Black Mode
Alignment layer Inorganic thin film
Liquid crystal cell gap Less than 2 μm
Optical
Projection system 3-SXRD panel, prism color integrated system
Display device SXRD, 1.55-inch (diagonal),
4096 (H) x 2160 (V) pixels on each chip
Lamp 4.2 kW Xenon lamp (x1), 3.0 kW Xenon lamp (x1), or
2.0 kW Xenon lamp (x1)
Contrast More than 2000:1
Light output (average) 21000 lumens (center)
(USHIO DXL-40SRX 4.2 kW lamp)
14
Signals
Media block input 4096 x 2160 pixels
HD-SDI/Dual-link HD-SDI* 1920 x 1080 pixels (SMPTE 372M/SMPTE 292M/ITU-R.
BT709/BTA-S004), 12 bit/X'Y'Z' (Dual-link HD-SDI)
DC-SDI/Dual-link DC-SDI* 2048 x 1080 pixels at 23.98PsF/24PsF/24P,
12 bit/X'Y'Z' (Dual-link DC-SDI)
DVI-D XGA (1024 x 768) at 60 FPS,
HD (1280 x 720) at 50/60 FPS (HDCP),
Quad-VGA (1280 x 960) at 60 FPS,
SXGA (1280 x 1024) at 60 FPS,
SXGA+ (1400 x 1050) at 60 FPS,
UXGA (1600 x 1200) at 60 FPS,
WUXGA (1920 x 1200) at 60 FPS,
HD (1920 x 1080) at 24/50/60 FPS (HDCP),
DC (2048 x 1080) at 24/48/60 FPS
Input/Output
Input A DVI-D (HDCP)
Input B Open (option slot for the LKRI-003 or LKRI-005 board)
Input C A channel MDR- 68-pin (x1) (for projector output A of Media Block,
SRLV connection)
B channel MDR- 68-pin (x1) (for projector output B of Media Block,
SRLV connection)
Remote interface D-sub 15-pin (female) (x1), RS-232C
RJ-45 (x1), 10BASE-T/100BASE-TX Ethernet
DCP ingest port (x1)
Interlock D-sub 15-pin (female) (x1), RS-232C
For supply of power to an external ventilation fan and
control of its operation
General
Power consumption Max. 5.4 kW (4.2 kW lamp)
Max. 4.2 kW (3.0 kW lamp)
Max. 3.0 kW (2.0 kW lamp)
Power requirements AC 200 V to 240 V, 50/60 Hz, single-phase,
27 A to 22.5 A
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 35% to 85% (no condensation)
Storage temperature -20 °C to +60 °C (12 °F to 140 °F)
Storage humidity 10% to 90%
Dimensions (W x H x D) 700 x 640 x 1250 mm (27 5/8 x 25 1/4 x 49 1/4 inches)
(excluding a touch panel display and projecting parts of
the unit such as a status light and a chimney)
Mass 195 kg (429 lb) ( excluding an optional lamp and a lens)
Others
Colorimetry Xenon color primaries
White reference Xenon white reference
Safety regulations [UL60950 listed], [cUL60950], [FCC Class A],
[IC Class A], [VCCI Class A], [EN60950], [C-tick],
[EN55022 Class A]
Supplied accessories Keys for removing panels (5),
Keys for lamp replacement panel (2),
Lens attachment screws (M8) (4),
Status indicator lamp (1), TPC adaptor (1 set),
One-touch bush (1), Attachment screws for status
indicator lamp and TPC adaptor (1 set),
Duct for LMT-300 (A) (1), Duct for LMT-300 (B) (1),
LVDS cables (2), CSS cable (1), Ethernet cable (1),
Operating instructions (1)
* To support the HD-SDI/Dual-link HD-SDI or DC-SDI/Dual-link DC-SDI interfaces, the LKRI-003 Dual-
link HD/DC-SDI Input Board is required. For information on using this board, please contact your
nearest Sony office.
Encoding primaries X
R 0.6800 0.3200
G 0.2650 0.6900
B 0.1500 0.0600
X
White reference 0.3140 0.3510
Y
Y