NETGEAR RND2110v2 Hardware Manual page 31

2. Pull out the disk tray and replace the disk.
1
1. Hard drive
2. Empty disk tray
3. Assembled disk tray
Make sure that the hard disk connectors face the interior of the disk bay.
3. Slide the disk tray back into the unit and press the handle to secure the disk.
The volume automatically synchronizes with the new disk in the background. This might
take several hours, depending on the disk size. You can continue to use your ReadyNAS,
although access is slower until the volume synchronization finishes. You are notified by
email when the process is complete.
ReadyNAS Duo v2 and NV+ v2
2
Disks
31
3