Mtp Backup Process - D-Link ShareCenter DNS-345 User Manual

Section 4 - Configuration
1. Connect a MTP USB device to the USB port on the back panel of the
device. The OLED screen will enter the backup mode if MTP Backups
has been enabled in the MTP backup settings.
2. Press the Power button to start the backup process. The OLED
screen displays that the backup is in the process. The ShareCenter
will create a new folder in the destination folder that you selected
in the MTP backups settings and will copy all the media files from
the MTP USB device to this folder.
D-Link ShareCenter DNS-345 User Manual

MTP Backup Process

310