Mtp Backup Process - D-Link ShareCenter DNS-320L User Manual

Section 4 - Configuration
1. Connect a MTP USB device to the USB port on the back panel of the
device. The DNS-320L will enter backup mode if MTP Backups has
been enabled in the MTP backup settings.
2. Press the USB button to start the backup process. The blue USB
LED flashes briefly to display that the backup is in the process. The
ShareCenter will create a new folder in the destination folder that
you selected in the MTP backups settings and will copy all the media
files from the MTP USB device to this folder. At this time the USB LED
remains blue until the device is disconnected.
D-Link ShareCenter DNS-320L User Manual

MTP Backup Process

217