Advertisement
DESIGNATION
Printer mechanism
With Auto cutter
Centronics Standard with Auto cutter
Interface board
Serial (RS-232C) standard with auto cutter
LSI(MCU)
*1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path)
and 302 is for rear paper insertion (straight path).
*2: 011 supports ANK and 101 supports ANK+Kanji.
*3: 012 supports ANK and 111 supports ANK+Kanji, + FLASH memory.
*4: CU101 supports Kanji and cutter control.
GENERAL SPECIFICATIONS
Item
Part number
Printing method
Dot structure
Dot pitch (Horizontal)
Dot pitch (Vertical)
Effective printing area
MCL301
Paper width
MCL302
Paper thickness
Cutting type
Number of columns
Maximum printing speed
Character types
Character composition, dimensions (H W),
Number of characters
Item
FTP-622MCL301/302
Thermal-sensitive line dot method
448 dots/line
0.125 mm (8 dots/mm)—Dot density
0.125 mm (8 dots/mm)—Line feed pitch
56 mm
58 mm
60 mm
1
60~100 m*
full or partial
37 columns/line (24 12 dot font)
640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159
JIS KANJI (FTP-622DCL101/111): approximately 6800
24
12 dots, (3.0
24
24 dots, (3.0
16
8 dots, (2.0
16
16 dots, (2.0
FTP-622MCL301/302
Part number
FTP-622MCL301/302
FTP-622DCL011/111
FTP-622DSL011/012
FTP-622CU101
Specifications
International characters: 195
1.5 mm), 37 columns
3.0 mm), 18 columns
1.0 mm), 56 columns
2.0 mm), 28 columns
*1
*2
*3
*4
(Continued)
2
Advertisement
