Advertisement
DESIGNATION
Printer mechanism
Standard
Printer mechanism with cutter
Parallel (Centronics Standard)
Interface board
Serial (RS232C)
LSI(MCU)
Thermal head cable
Cables
Parallel interface cable
Serial interface cable
Power cable
*1: 001/303 is for front paper insertion (curl path) and 002/304 is for rear paper insertion (straight path).
*2: 001/011 supports ANK and 101 supports ANK + Kanji.
*3: 001/011/012 supports ANK and 111 supports ANK + Kanji.
*4: CU101 supports Kanji and cutter control.
GENERAL SPECIFICATIONS
Item
Part number
Printing method
Dot structure
Dot pitch (Horizontal)
Dot pitch (Vertical)
Effective printing area
MCL001/303
Paper width
MCL002/304
Paper thickness
Cutter type
Number of columns
Maximum printing speed
Character types
Character composition, dimensions (H W),
Number of characters
FTP-632MCL001/002/303/304
Item
FTP-632MCL001/002
Thermal-sensitive line dot method
576 dots/line
0.125 mm (8 dots/mm)—Dot density
0.125 mm (8 dots/mm)—Line feed pitch
72 mm
80 mm
85 mm
1
60~100 m*
---
48 columns/line (24 12 dot font)
640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159
JIS KANJI (FTP-622DCL101/111): approximately 6800
24
12 dots, (3.0
24
24 dots, (3.0
16
8 dots, (2.0
16
16 dots, (2.0
Part number
FTP-632MCL001/002
FTP-632MCL303/304
FTP-622DCL001/011
FTP-622DSL001/011/012
FTP-622CU101
FTP-622Y001
FTP-622Y201
FTP-622Y301
FTP-622Y401
Specifications
FTP-632MCL303/304
60~100 m*
full or partial
International characters: 195
1.5 mm), 48 columns
3.0 mm), 24 columns
1.0 mm), 72 columns
2.0 mm), 36 columns
*1
*1
*2
*3
*4
1
(Continued)
2
Advertisement
