Overview Of Paper Operations - Fujitsu DL9300 User Manual

PAPER HANDLING
OVERVIEW OF PAPER
OPERATIONS
3-2
The following buttons are used in paper handling:
• LF/FF, TEAR OFF, PAPER PATH, MICRO, MICRO and
LOAD buttons on the control panel
(A different function is enabled when each button is pressed in
conjunction with the ONLINE button.)
The following figure shows the location of each of the button:
Location of the buttons
Table 3.1 summarizes the use of buttons in paper handling. More
detailed information is provided later in this chapter.
NOTE
To load or feed paper, the printer must be:
• Online but not receiving or printing data
• Offline but not in setup mode
To micro feed paper, the printer must be:
• Online but not receiving or printing data
• Offline but not in setup mode
POWER PAPER OUT
FRONT REAR CUT
TRACTOR TRACTOR SHEET
ONLINE
PAPER PATH
SAVE TOP
MULTI
LOAD
MULTI
COPY
LF / FF
FRONT
FRONT DIR TEAR OFF
MICRO MICRO
SET UP
User's Manual