Adding a New Contact
Use the following procedure to add a new contact.
Saving a Number from the Home screen
1. From a Home screen, touch
2. At the Save contact to prompt, touch Device or an
Account name.
3. Touch the Contact photo to set up a photo to identify
the contact.
4. Touch contact fields to display the keyboard and enter
information:
• Some fields have preset values. Touch the field and touch the
desired value. For example, touch the
touch a label for the field.
• Other fields have to be input. Touch the field and use the
on-screen keyboard to input information.
• Touching the check box next to some fields may make
additional fields available.
• Touch
to add additional fields.Touch
unused field. Also, touch Add another field to add other fields.
• Touch the screen and swipe up or down to display additional
fields or touch Next on the keyboard to move to the next field.
.
Contacts
Label tab and
to remove an
5. Touch
Back to remove the keyboard.
6. When you finish entering information, touch Save.
– or –
Touch Cancel
OK to cancel and discard changes.
Tip: Display a contact's record and touch the Email field to
send an email, the Address field to display the address on
a map, or the Website field to link to the website.
Adding Pauses to Contact Numbers
When you call automated systems, you are often required to
enter a password or account number. Instead of manually
entering the numbers each time, you can store the numbers
in your Contacts along with special characters called pauses
and waits. A pause will stop the calling sequence for two
seconds and a wait will pause the calling sequence until you
enter a number or touch a key.
To add a pause or a wait to an existing Contact:
1. From a Home screen, touch
2. Touch the name or number to open the Contact.
3. Touch
to edit.
4. Touch the phone number field.
Contacts.
Accounts and Contacts
49