Table of Contents
Advertisement
Adding a Basic VPN
Before you add a VPN you must determine which VPN
protocol to use: PPTP, L2TP/IPSec PSK, L2TP/IPSec RSA,
IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA.
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to "Lock
Screen Settings" on page 144.
2. From the Settings screen, touch
More networks
VPN.
3. Touch Basic VPN.
4. Touch
Add.
5. Enter a name for the VPN network in the Name field.
6. Select a VPN type from the Type drop-down menu.
7. Enter the Server address and any other required fields
that are dependent upon the Type you entered
previously.
8. Touch the Show advanced options check box to display
additional VPN options.
9. Touch Save to save your VPN settings.
NFC
NFC (Near Field Communication) allows data exchange when
you touch your device with another compatible device. This
is used for applications such as S Beam.
To activate NFC, follow these steps:
1. From the Settings screen, touch
Connections
2. Touch the ON/OFF slider, located to the right of the NFC
Android Beam
When Android Beam is activated, you can beam app content
to another NFC-capable device by holding the devices close
together. You can beam browser pages, YouTube videos,
contacts, and more.
1. From the Settings screen, touch
2. Tap the OFF / ON icon to turn Android Beam ON
3. Touch the back of your device with another NFC-
NFC.
field, to turn NFC ON
NFC
Android Beam.
capable device and the content is transferred.
Changing Your Settings
Connections
.
Connections
.
141
Advertisement
Table of Contents
