Setting Documents - Fujitsu M3092DC Operation Manual

3.3.2 Setting Documents

This section explains how to set documents.
Loosening documents
Before setting documents, sufficiently loosen them by the following
procedure:
Leveling both ends and setting the documents
Level both ends of the documents so that they can be read correctly.
Set the documents as follows:
For single-side reading: Place the reading side facing the document
support surface.
M3092DC Image Scanner Operation Guide
Remove a 4 mm thick section of pages, hold the ends of the
documents with both hands, and bend the documents.
Hold the documents strongly with both hands so that both ends of the
documents are slanted, and then unbend the documents so that they
are inflated.
Repeat the operations described above two or three times.
Turn the document by 90
4 m m
4 mm
o
and similarly loosen it.
3-7