HP 240 Maintenance And Service Manual page 107

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
●
Fan/heat sink assembly (see
To remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
Battery on page 41), and then remove the following components:
WLAN module on page
Hard drive on page 54)
Keyboard on page 60)
Top cover on page 63)
Speakers on page 71)
USB board on page 73)
Power connector cable on page
Display assembly on page
System board on page
Fan/heat sink assembly on page
49)
75)
77)
86)
92)
Component replacement procedures 99