Installing The Display Panel; Removing The Display Panel Brackets - Dell Precision M4300 Service Manual

5. Starting from the sides of the display panel, use your fingers to separate the bezel from the top cover and lift the bezel away from the top cover.
Removing the Display Panel
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1. Follow the procedures in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the eight M2.5 x 5-mm screws from the display panel.
5. Lift the display panel out of the top cover.
1 M2 x 3-mm screws (8)
Installing the Display Panel
1. Replace the eight M2.5 x 5-mm screws that secure the display panel to the top cover.
2. Route the display feed-flex cable and antenna cables so that they rest in the notch located in the bottom edge of the top cover.
3. Replace the display bezel .
Removing the Display Panel Brackets
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1. Follow the procedures in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the four M2 x 3-mm screws from the right display panel side bracket and lift away the bracket.
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
2 display panel
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
3 top cover