American Audio M1224FX User Manual And Reference Manual page 13

M1224FX
23. LEVEL mETER - This LED displays the signal level of the selected LEVEL METER SIgNAL bUTTON.
When the meter lights up RED then the output is hitting the clipping level.
24. CONTROL ROOm/HEADPHONE CONTROL - This controls the signal level that is sent to the
CONTROL ROOM JACkS or HEADPHONE JACk.
25. LEVEL-mETER SIGNAL BUTTONS - Use these buttons to select the signal that is sent to the
CONTROL ROOM outputs and/or HEADPHONE output. The ouput level will be shown in the LEVEL
METER. Please see the illustration below to see how the button settings correspond to the signal
selection.
26. TO mAIN BUTTON - When this button is pressed "In" (On), the mixer will send the signal from the
ALT 3/4 to the MAIN L/R outputs.
27. mAIN L/R FADERS - This fader adjusts the final signal level sent to the MAIN L/R output.
Switch
Signal
PFL
TAPE IN
ALT3/4
MAIN
American Audio - www.americanaudio.us - M1224FX Instruction Manual Page 13
© ®
MaiN CONTROLS aNd FUNCTiONS cont.
PFL TAPE IN ALT3 / 4
ON
ON
OFF ON
OFF
OFF
C-R OUT
&
PHONES