Replacing The Palm Rest - Dell Inspiron 1120 Service Manual

1 power button board cable connector
3 touch pad cable connector
Replacing the Palm Rest
1. Follow the instructions in Before You
2. Align the palm rest on the computer base and gently snap the palm rest into place.
3. Slide the touch pad cable and the power button board cable into their connectors on the system board and press down on the connector latch to secure
the cables.
4. Replace the three screws that secure the palm rest to the computer base.
5. Follow the instructions from
6. Replace the keyboard (see
7. Close the display and turn the computer over.
8. Replace the four screws that secure the palm rest to the computer base.
9. Replace the two rubber caps that cover the palm rest screws on the computer base.
10. Replace the battery (see Replacing the
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
2 screws (3)
4 plastic scribe
Begin.
step 5 to step 7 in Replacing the Hard
Replacing the Keyboard).
Battery).
Drive.