Removing The Ac Adapter Connector - Dell Inspiron 1120 Service Manual

Back to Contents Page
AC Adapter Connector
Dell™ Inspiron™ 1120 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the AC Adapter Connector
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the keyboard (see
4. Follow the instructions from
5. Remove the palm rest (see
6. Remove the display assembly (see
7. Remove the middle cover (see
8. Remove the audio board (see
9. Lift and remove the bracket off the computer base as shown in the illustration.
1 bracket
10. Disconnect the AC adapter connector cable from the connector on the system board.
11. Make note of the cable routing and carefully dislodge the AC adapter connector cable from the routing guides.
12. Lift the AC adapter connector off the computer base.
Begin.
Battery).
Removing the Keyboard).
step 4 to step 6 in Removing the Hard
Removing the Palm Rest).
Removing the Display Assembly).
Removing the Middle Cover).
Removing the Audio Board).
Removing the
Drive.
Battery) before working inside the