Channel Control; Con¿Guring The Channel Menu; Managing Channels - Samsung LN40B500P3FXZA User Manual

CHANNEL CONTROL

¦
Con¿guring the Channel
Antenna Air / Cable
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
T
Press the TOOLS button to display the Tools
selecting Tools Switch to Cable (or Switch to Air).
Auto Program
„
Air: Air antenna signal. / Cable: Cable antenna signal. /
signals
N
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
N
After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
program menu then reappears.
N
If you want to stop Auto Programming, press the ENTERE button. The
Select Yes by pressing the
Clear Scrambled Channels (digital channels only)
This function is used to ¿lter out scrambled channels after
minutes.
N
To stop searching scrambled channels: Press the ENTERE
press the ENTERE button.
N
This function is only available in
Channel List
For detailed procedures on using the
O
You can select these options by simply pressing the CH LIST
Fine Tune (analog channels only)
Use ¿ne tuning to manually adjust a particular channel for optimal reception.
N
If you do not store the ¿ne-tuned channel in memory, adjustments are not saved.
N
* will appear next to the name of ¿ne-tuned channels.
N
To reset the ¿ne tuning setting, press the
¦

Managing Channels

Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.
„
All Channels
Shows all currently available channels.
„
Added Channels
Shows all added channels.
„
Favorite
Shows all favorite channels.
O
To select the favorite channels you have set up, press the
Menu
menu. You can also set the Antenna by
Auto: Air and Cable antenna
or button, then press the ENTERE
Auto Program is completed. This process may take up to 20~30
button to select Stop. Press the
Cable mode.
Channel List, refer to the 'Managing Channels' instructions.
button on the remote control.
button to select Reset, then press the
FAV.CH
English - 15
Stop Auto Program? message will be displayed.
button.
button to select
ENTERE button.
Air
button on the remote control.
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Yes, then
2 Air
4 Air
4-2 TV #8
8 Air
13 Air
13-1 TV #3 Alice's Adventures in Wonderland
T
Zoom Select Tools