Plug & Play Feature - Samsung LN40B500P3FXZA User Manual

¦
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
POWER P button on the remote control.
1. Press the
N You can also use the POWER P button on the TV.
N
The message Menu Language, Store Demo, Channels, and Time will be set.
displayed.
2. Press the ENTERE button, then
displayed.
3. Press the or button to select the language, then press the
installing this TV in your home. is displayed.
4. Press the or button to select
Antenna source to memorize. is displayed.
N
We recommend setting the TV to Home Use
N
Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and
you want to return to
press and hold the MENU button on the TV for 5 seconds.
5. Press the or button to memorize the channels of the selected connection.
N
Air: Air antenna signal. /
N
In Cable mode, you can select the correct signal source among
button, then press the
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
6. Press the ENTERE button to select
N
To stop the search before it has ¿nished, press the ENTERE
N
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the
displayed.
7. Press the ENTERE button.
Press the or button to select Auto, then Press the
displayed. If you select Manual, Set current date and time is displayed.
8. Press the or button to select
9. Press the or button to highlight the time zone for your local area. Press the ENTERE button. If you have received a
digital signal, the time will be set automatically. If not, see page 22 to set the clock.
10. The connection method to provide the best quality HD is offered. After con¿rming the method, press the ENTERE button.
11. The message Enjoy your TV. is displayed. When you have ¿nished, press the
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the
2. Press the ENTERE button again to select
N
The Plug & Play feature is only available in the TV mode.
Sets the menu language. menu is automatically
Store Demo or Home Use, then press the
mode for the best picture in your home environment.
Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed,
Cable: Cable antenna signal. / Auto: Air and
ENTERE button. If you have Digital cable, select the cable system signal source for both Analog
Start. The TV will begin memorizing all of the available channels.
ENTERE button when channel memorization is complete. The message Set the Clock Mode. is
ENTERE button. The message Set to daylight saving time. is
Off, On or Auto, then press the
or
Plug & Play.
English - 14
Menu Language, Store Demo, Channels, and Time will be set.
is
ENTERE button. The message
ENTERE button. The message
Press the ENTERE
Cable antenna signals.
STD, HRC, and IRC by pressing the
button with Stop selected.
ENTERE button.
ENTERE button.
button to select Setup, then press the
Plug & Play
Start
E
Enter
Select 'Home Use' when
Select the
button to select Start.
, , or
ENTERE button.