Usb Mode - Haier LE24T3 Owner's Manual

Maintenance/Troubleshooting
is set as OFF and max volume returns to 100 (except
password).
2
I C Bus
It is no need for user to select the after-sale service
option.

USB Mode

Note
The diagrams in the following section are
schematic and only for your reference. Please see
the actual product if necessary.
TO USE THE USB DEVICE
A
Supported file formats:
Photo: *.jpg, ect;
Music: *.mp3, ect;
TEXT Reader: *.txt
Note
Due to the particularity of file coding, some files
may be unable to read.
B
Supported equipment:
Support the USB flash disks and Mobile harddisks
that supports Mass Storage Protocol and whose file
system is FAT32, If USB equipment could not be
identified due to unsupported file system, please
format the equipment to the above-mentioned file
system.
C
To achieve smooth playing, ensure the following:
The file code rate should be lower than 300KB/S;
Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
When connecting/removing the USB
device
22 LCD television Owner's Manual
A
Press SOURCE on the remote control unit to select
USB option.
B
Insert USB equipment into corresponding USB
interface 2s after starting the system.
C
After entering the system menu, press
remote control unit to select the require USB files,
press OK button to confirm the selection and enter
the file list relative to the selection.
D
Press / on the remote control unit to select the
required file, press OK button to enter the selected file.
E
To exit the streaming media playing system and
watch a TV program, you must press EXIT button to
return to the streaming media main menu at first
(to protect equipment), and then press SOURCE to
select TV to return to the TV mode.
Note
Under source of USB, when press button MENU,
screen goes black, except when images or movies
are being played.
While playing the USB, press EXIT button repeatly,
the screen picture will return to USB main
interface, and only at this time you can switch
corresponding signal sources by pressing SOURCE
again.
Please do not unplug the USB device when the
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.
Operating the USB device
A
Press / to scroll through main menu or submenu
and select your desired option.
B
Press OK to confirm your selection.
C
Press / to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
D
Press to play, and press it again to pause playing.
E
Press ZOOM to magnify pictures; when the picture is
/
enlarged, press and
F
Press EXIT repeatedly to return to the main menu.
Note
/ on the
/
to move the picture.