Pc Setup; Monitor Out Setup - Haier LE24T3 Owner's Manual

available. Then, make the corresponding audio
connections.
How to use
A
Turn on the digital set-top box.
(Refer to the owner's manual for the digital set-top box.)
B
Use SOURCE on the remote contralto select PC or
HDMI (Y, P /C , P /C ) mode.
b b r r
C
Press Play button on external equipment for
program play.
Y Pb Pr

PC Setup

How to connect
A
Use the TV's PC IN port for video connections.
B
Then, make the corresponding audio connection. If
using a sound card, adjust the PC sound as required.
How to use
A
Turn on the PC and the TV.
B
Turn on the display by pressing the
on the TV's remote control.
C
Use SOURCE on the remote control to select PC source.
D
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC mode to another resolution,
DIGITAL OUT
HDMI IN
(COAXIAL)
PC/DVI AUDIO IN
/
POWER button
External Equipment Connections
change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture
is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or
consult the manufacturer of the PC graphic card.
Y Pb Pr
Note
Avoid keeping a fixed image on the TV's screen for
along period of Time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal and
Vertical frequencies is separate.
To obtain the best picture, do not play the USB,
YP P , HDMI or PC source at the same time.
b r

Monitor Out Setup

The TV has a special signal output capability which
allows you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV's AV OUT.
See the Operating Manual of the second TV or monitor
for further details regarding that device's input settings.
2
LCD television Owner's Manual
DIGITAL OUT
HDMI IN
(COAXIAL)
PC IN
PC/DVI AUDIO IN
11