Table of Contents
Advertisement
Menu Operations
Setup Menu Options
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
2. Press VOL+/OK button to enter the Setup menu and CH+/CH- to go up and
down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Tuning Band: Press VOL+/OK button to select Cable Auto, Air, Cable,
Cable HRC, Cable IRC.
DTV Signal: In DTV mode, you can adjust the angle, orientation of the antenna
etc to improve the quality of the signal.
Auto Ch Search: Press CH+/CH- button to select the item. Then press VOL+/
OK button to enter your selection and scan. All channels now available will be
automatically preset in order .After the search has finished, the first program
number will display on the screen. This search automatically adds only the
active channels in your area to the TV's memory. It deletes any channels on
which there is no broadcast or a poor signal. The channels found are
automatically saved as below:
Note: The TV searches channels in analog first and then searches channels in
digital signal .
Tuning Band
Picture
DTV Signal
Auto Ch Search
Add On Ch Search
Audio
Manual Ch Set
Channel Label
Setup
Menu Language
Reset
Feature
Move /OK Select /Menu Exit
Auto program Menu
NTSC Channel 19
Analog Channels Found
Digital Channels Found
Progress(%)
12
Menu Stop
Air
English
Not Found
2
0
Advertisement
Table of Contents
