Table of Contents
Advertisement
Menu Operations
*
In this manual, the OSD (On Screen Display) may be differ from your TV
These are examples to illustrate the TV's operation.
Press INPUT to select the input source. The menu for each source may be
different .
1. Press MENU button to display the main menu, and CH+/CH- to select the
main menu .
2. Press VOL+/OK button to enter the menu and CH+/CH- to go up and down
to select the desired option .
3. Press VOL+/OK button to confirm and VOL+/VOL- to make changes to
the parameters
4. Press the CLR/MENU button to exit the menu
Picture Menu Options
Picture quality can be adjusted for any input separately .
The picture quality on the screen can be adjusted as follows:
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
2. Press VOL+/OK button to enter the Picture menu and CH+/CH- to go u p
and down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Note: The options may be different because of the inputs.
Note: Symbols on top of the menu in this manual may differ from the actual set display.
Picture Mode
Picture
Contrast
Brightness
Sharpness
Audio
Color
Tint
Setup
Aspect Ratio
Feature
Move /OK Select /Menu Exit
Personal
50
50
50
50
50
Wide
Advertisement
Table of Contents
