Security Menu - Setting The Security Features - Fujitsu LifeBook S6120D Bios Manual

SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through the Setup
Utility on page 2 for more information)
The following tables show the names of the menu fields
for the Security menu and its submenus, the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
C A U T I O N
Entering a password incorrectly three times in a row will
cause the keyboard and mouse to be locked out and the
warning [System Disabled] to be displayed. If this
happens, restart the computer by turning off and on the
power with the power switch and use the correct
password on reboot.
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Hard Disk Security
Owner Information
Security Panel On Resume:
F1 Help
ESC Exit
PhoenixBIOS Setup Utility
Advanced Security
Select Item -/Space
Select Menu Enter
Figure 13. Security Menu
P O I N T
If you set a password, write it down and keep it in a
■
safe place. If you forget the password you will have to
contact your support representative to regain access
to your secured functions and data.
■ If you make an error when re-entering the password
a [Warning] will be displayed on the screen. To try
again press the [Enter] key and then retype the pass-
word. Press the [Esc] key to abort the password set-
ting process.
■ If the Password on Boot is Disabled you will not have
to type your password upon resuming the system
from the Suspend or Save-to-Disk modes.
Boot Info Exit
Clear
Clear
Press <Enter> key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
Then password entry is
[Disabled]
required to enter BIOS
[Disabled]
Setup.
[Disabled]
[All]
[Enabled]
Change Values
Select Sub-Menu
21
S e c u r i t y M e n u
Item Specific Help
F9 Setup Defaults
F10 Save and Exit