Panasonic THP50X20 User Manual page 27

Menu Item
VIERA Link
Power on Link Sets to use Power on Link functions (Off / On) (p. 35)
Power off Link Sets to use Power off Link functions (Off / On) (p. 35)
Standby
Power Save
Intelligent
Auto
Standby
Shipping
Condition
Software
Licence
System
Information
AV Colour
System
Colour
Matrix
Auto
Standby
Power Save
16:9
Overscan
Refresh Rate
●
A different menu will be displayed in the mode of SD Card (p. 32 - 33).
●
Only available items can be selected.
26
Adjustments / Configurations (alternatives)
Sets to use VIERA Link functions (Off / On)
●
VIERA Link functions become available when "VIERA Link" is set to "On" (p. 36).
Controls the power consumption in Standby mode of the connected
equipment to reduce the consumption (Off / On) (p. 35)
●
This function is available when "VIERA Link" is set to "On" and "Power
off Link" is set to "On".
Makes non-watched or non-used connected equipment go into Standby
mode to reduce the power consumption (Off / On (With reminder) / On
(No reminder)) (p. 35)
●
This function is available when "VIERA Link" is set to "On".
Resets all settings to the original condition (p. 31)
Displays the software licence information
Displays the system information of this TV
Selects optimum colour system based on video signals in AV mode (Auto /
PAL / SECAM / M.NTSC / NTSC)
Available only with 480p or 576p input on video signals in a natural colour from
digital equipment connected to AV1 component or HDMI1 / HDMI2 / HDMI3
terminals. Select SD or HD to adjust suitable colour parameters for SD (standard
definition) or HD (high definition)
●
SD: Input signal is a normal TV system
●
HD: Input signal is a high definition system
Sets the time the TV automatically goes to Standby mode when no operation
is performed for the selected times (Off / 2 hours / 4 hours)
●
Inserting the SD Card to the card slot does not affect this function.
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going to Standby
mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area for displaying the image (Off / On)
On: Enlarges the image to hide the edge of the image
Off: Displays the image in the original size
●
Set to "On" if noise is generated on the edges of the screen.
●
This function is available when aspect is set to "16:9".
●
This function can be memorized separately for SD (Standard Definition)
and HD (High Definition) signals.
Changes the image processing of the panel (depending on the input
signal) (50Hz / 100Hz)
●
Set to "100Hz" normally.