Lenovo 1141BUU Hardware Maintenance Manual page 83

Step Screw (quantity)
2
M2 × 3 mm, wafer-head, nylon-coated (2)
When installing: Make sure that the connector is attached firmly to the system board.
When installing:
• Make sure that the cables are attached to the cable guides firmly.
• Make sure that you route the cables correctly and you tape up the cables in the proper positions as
shown in the following figure.
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)
.
Chapter 8 Removing and replacing a FRU
77