Removal steps of Bluetooth daughter card
Step
Screw (quantity)
1
M2 × 3 mm, wafer-head, nylon-coated (1)
When installing: Make sure that the connector on the bottom side of the card is attached firmly to the
system board.
1140 Express sub card
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 ExpressCard blank bezel" on page 57
•
"1030 Bottom slot cover" on page 58
•
"1040 Optical drive or travel cover" on page 59
•
"1110 Keyboard" on page 66
•
"1120 Top case assembly" on page 68
Removal steps of Express sub card
When installing: Make sure that the Express sub card is attached firmly to the system board.
72
Hardware Maintenance Manual
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)