Advertisement
EPSON
EPSON AMERICA, INC.
SERVICE
PSB NO.: S-0053
SUBJECT:
EQUITY
The purpose of this bulletin is to clarify the correct
usage
of
Many
customers
Support because of getting a "EXEC
when trying to run the system diagnostics MEMORY test.
This occurs because many people are not booting the system
with
the
program after booting from the MS-DOS system disk or hard
disk drive.
diagnostics
Note: To run the System diagnostics, boot your system with
the diagnostics diskette in drive A.
option 4 from the OPERATION menu. If you start this
program in any other way, some tests may produce
strange
The "EXEC failed" error message will not occur if the
diagnostic
Please note that the diagnostic diskette should not be
modified in any way or similar results may occur.
the
diagnostics
If
America's
system files then the system files should be copied to
the diagnostics disk before attempting to run the
diagnostic
EPSON
AMERICA
P
RODUCT
DATE: 6/1/88
I+/II+/III+/LT DIAGNOSTIC
the
DIAGNOSTIC
and
dealers
diagnostic
disk
In
the
instructions
the
following
results.
diskette
is
diskette
Training
Department
programs.
SERVICE,
23610
S
B
UPPORT
DISK.
have
contacted
failed"
but
rather
loading
for
statement
is
properly
loaded,
was
obtained
and
does
TEL0
AVENUE,
ULLETIN
PAGE:
1 of 1
"EXEC
failed"
Epson's
Technical
error
message
the
diagnostic
performing
system
made:
Then
select
through
Epson
not
contain
the
TORRANCE,
CALIF.
MESSAGE
90505
Advertisement
