User Manual
11/12/04
Associate a Sound with Service Access
From the Bluetooth Configuration Panel, Local Services tab:
1. Double-click a service name and then select the Notifications tab.
2. Select the options you want; both visual and sound notifications may be selected for a single event.
3. Choose a sound; click the Browse button and navigate to the sound file (*.wav) to be used for notification.
To preview the sound file, click the play button.
4. Click OK to close the service's property dialog box.
Audio Gateway
The Bluetooth Audio Gateway service enables the computer to use the microphone and speakers on a remote
Bluetooth device as the input and output devices for the computer.
For example, if this computer has voice recognition capabilities, a Bluetooth headset might be used as the
audio input device.
Hardware Requirements
•
The Bluetooth hardware on this computer and on the remote device must support audio.
•
The remote device handles both audio input and output for this computer; therefore, this computer does
not require a sound card, microphone, or speakers.
Configure the Audio Gateway Service
From the Notification area, at the far right of the taskbar, right-click the Bluetooth icon, select Advanced
Configuration > Local Services, and then double-click the Audio Gateway service.
Set the common configuration properties of the service, and then click OK.
Bluetooth Image Transfer
The Bluetooth image transfer service allows this computer to accept images from remote devices that support
Bluetooth image transfer.
The supported image formats are:
•
BMP
•
GIF
•
PNG
•
JPG
Received images are stored in the Bluetooth exchange folder.
Configure the Bluetooth Imaging Service
From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration > Local Services,
and then double-click the Bluetooth Imaging service.
Set the common configuration properties of the service, and then click OK.
Document WL-BTD 202
Configure Bluetooth
WL-BTD 202
Page 27