Configuring With The Wlan Utility (Infrastructure) - Asus WL-160W Quick Start Manual

Quick Start Guide

Configuring with the WLAN utility (Infrastructure)

Use ASUS WLAN utility to get connected with an existing wireless network.
1. Right-click the wireless connection icon
and select Wireless Settings.
3. Use Site Survey if you don't know the
SSID of your access point(s).
5. Check the Status page to see the
association state. If connection is
established, the box shows "Connected -
xx:xx:xx:xx:xx:xx".
4
2. Check the Config page to set the SSID
(network name) to that of your wireless AP.
4. Encryption settings must match those
at the access point. Ask your network
administrator about settings if necessary.
Click Apply to activate the settings.
6. Check the Connection tab to see the
signal strength. Click OK to exit the utility.
ASUS WLAN Adapter