Table of Contents
Advertisement
WL-BTD 202
Close an Imaging Connection
Imaging connections close automatically when the image transfer is complete.
To abort the image transfer, click Cancel in the transfer dialog box.
Configure
The Bluetooth Configuration Panel > Client Applications > Imaging > General tab provides options to configure:
•
The application name - to change it, highlight the existing name and enter the new name.
•
Secure connection - to enable secure connection, select the option box. To disable secure connection,
clear the option box.
Remote Camera Operation
Remote operation of the Bluetooth imaging device, such as the ability to trip a camera's shutter or browse the
images on a device, may be possible, depending on the functions supported by the remote device.
There are three prerequisites:
•
This computer must be running under the Windows XP operating system.
•
The remote imaging device must support the action. See the remote imaging device's documentation for
information about the remote functions the device supports.
•
The remote imaging device must be installed on this computer (see below).
Install an Imaging Device
Note: Only Windows XP can install an imaging device; previous operating systems do not have
native support for this option.
Perform a search for devices and then, from Entire Bluetooth Neighborhood, right-click a Bluetooth imaging
device, and select Add Camera from the shortcut menu.
Windows installs the camera and adds it to the Cameras and Scanners section of My Computer.
Uninstall an Imaging Device
In Entire Bluetooth Neighborhood, right-click an installed Imaging device and then select Delete Camera from
the shortcut menu.
File Transfer
The Bluetooth File Transfer application allows this computer to perform file operations on the Bluetooth
exchange folder (and the folders and files it contains) of a remote device.
Page 20
Configure Bluetooth
User Manual
11/12/04
Document WL-BTD 202
Advertisement
Table of Contents
