Connection; Connecting The Player To A Tv Using The Hdmi Output Jack - Memorex MVBD2535 User Manual

CONNECTING THE PLAYER TO A TV USING THE HDMI OUTPUT JACK
HD
(not included)
NOTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or
Video OUT jack on the player.
• Set the TV's TV/VIDEO button or switch to the VIDEO setting.
• When connecting the Player, refer to the owner's manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• After connecting to the HDMI jacks, set the Display and Audio options as shown on pages 32-34.
• After detecting that the HDMI jack has been connected, the unit will use the HDMI jack to output video signal automatically.
• If connecting to a Receiver and TV that have an HDMI jack, please see page 12.
• Depending on your TV, some HDMI resolutions may not work.
• NOTE: Streaming services require the use of an HDMI connection.

CONNECTION

HDMI IN
MI cable
Back of the unit
HDMI
compatible
television
9