CONNECTING THE PLAYER TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
NOTES:
•
If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or
Video OUT jack on the player.
•
Set the TV's TV/VIDEO button or switch to the VIDEO setting.
•
When connecting the Player, refer to the owner's manual of the TV, as well as this manual.
•
When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
•
If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply store.
•
Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
CONNECTION
9