Connection; Connecting The Player To A Tv Using The Audio/Video Output Jacks; Connecting The Player To A Tv Using The S-Video Output Jack - Memorex MVBD2510 Operation User's Manual

CONNECTING THE PLAYER TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

CONNECTING THE PLAYER TO A TV USING THE S-VIDEO OUTPUT JACK

NOTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• Set the TV's TV/VIDEO button or switch to the VIDEO setting.
• When connecting the Player, refer to the owner's manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply
store.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• The video source is always output in 480i resolution, regardless of the setup menu settings.
All manuals and user guides at all-guides.com

CONNECTION

9