Rear Cover Removal
Figure: Rear cover removal
1. Manually unlock and remove the top cover cap (5). See Figure: "TV set rear view".
2. Make sure all power-, audio-, video- and coax- cables are unplugged.
3. Remove all Torx screws (1) around the edges of the rear cover.
4. Remove the four silver coloured Torx screws (2) around the stand holder. See figure
"Rear cover removal".
5. Carefully use a flat screwdriver to release the clamps (3). See figure "Rear cover
removal".
6. Remove the rear cover and store it in a safe place.
Note: avoid holding the button-area during removal (it can be easily damaged).