Panasonic Toughbook FZ-G1 Operating Instructions Manual page 31

Fz-g1 series
Hide thumbs Also See for Toughbook FZ-G1:
Table of Contents

Advertisement

1
Connect the DVD drive to the USB port.
2
Start the Setup Utility.
A Display "Charm" and touch - [Change PC settings] - [General].
B Touch [Restart now] under "Advanced startup".
C Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
Turn on the computer, and touch top left of the screen while [Panasonic] boot screen is
displayed.
l If the [Panasonic] boot screen is not displayed, turn on the computer while touching top
left of the screen.
l If the password is requested, enter the Supervisor Password.
3
Write down all of the contents of the Setup Utility and touch [Exit] and
double-touch [Load Default Values].
At the confirmation message, touch [Yes].
4
Check the [UEFI Boot] setting of the Setup Utility.
[UEFI Boot] should be set to as follows.
When the recovery disc for Windows 8 is used: [Enabled]
When the recovery disc for Windows 7 is used: [Disabled]
5
Set the Recovery Disc into the DVD drive.
6
Touch [Exit] and double-touch [Save Values and Reboot].
At the confirmation message, touch [Yes].
Computer will restart.
7
Touch top left of the screen while [Panasonic] boot screen is dis-
played.
The Setup Utility starts up.
l If the password is requested, enter the Supervisor Password.
8
Touch [Exit], then double-touch your DVD drive in [Boot Override].
9
Double-touch [Yes]
The computer will restart.
10
Touch [Reinstall Windows] and touch [Next].
11
At the confirmation message, touch [YES].
12
At the License Agreement screen, Touch [Yes, I agree to the provi-
sions above and wish to continue!] and touch [Next].
13
When the recovery disc for Windows 8 is used, touch [Next].
When the recovery disc for Windows 7 is used, select the setting and
touch [Next].
l [Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to "To
change the partition structure" (è page 21).
.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fz-g1aaazxbe

Table of Contents