Kyocera TASKalfa 2420w Hardware Operation Manual page 27

4. Insert each Flange (2) into both ends of the roll media core to be installed.
2
NOTE
(1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches
the side face of the roll media.
Inside Rim
Correct: Fully inserted
(2) Flange has Stoppers with sharp edge. Be sure not to touch them.
5. Push the green lever (4) down in either way. Position them flat against Flange to secure the roll
media.
4
Inside Rim
Gap
Wrong: not touching roll side
2-6
4
Chapter 2 Basic Operation