Product Features - D-Link DFE-550FX User Manual

Product Features

Designed for high performance and versatility, the DFE-550FX
Adapter provides the following features:
Plug and Play installation.
Complies with the IEEE802.3u/100Base-FX Ethernet standards.
PCI Bus Master direct memory access for high throughput and low CPU
utilization.
ACPI 1.0 power management compliant.
IEEE 802.3x Flow Control enabled with full duplex operation, allowing
enhanced operation when directly connected to a switch.
IEEE 802.1Q/VLAN Tagging compliant
VLAN dynamic registration using IEEE802.1Q GVRP standard
IEEE 802.1p compliant
D-Link in-house 32-bit intelligent Ethernet controller.
Built-in FIFO buffers.
Three LED indicators: Link, Activity, Full-duplex
Driver support for all leading Network Operating Systems.
Auto-assignment of IRQ, I/O addresses.
PCI 2.1 specification compliant
Transmission distance of 412m at half-duplex mode and 2000m at full-
duplex.
100Mbps Fast Ethernet data transfer rate.
Built-in SC connector.
D-Link DFE-550FX Adapter
3