Samsung SCX 6322DN - B/W Laser - All-in-One Service Manual page 35

Alignment & Adjustments
In the paper exit area
1. Press the release lever to open the side cover.
2. Open the front cover.
3. Pull down on the fuser lever. This will release pres-
sure on the paper.
4. Turn the Jam Remove Lever in the direction of the
arrow to move the paper to the exit area, then
gently pull the paper out through the exit area.
Service Manual
4-8
5. Push the fuser lever up.
6. Turn the Jam Remove Lever back to the original
position.
7. Close the front cover
Printing automatically resumes.
and the side cover .
Samsung Electronics