Super Io Configuration - Biostar A960G Manual

A960G+ / A960GL+ BIOS Manual
SuperIO Configuration
Advanced
Configure ITE8728 Super IO Chipset
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
Restore on AC Power Loss
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Parallel Port Address
This item allows you to determine access onboard parallel port controller with which
I/O Address.
Options: 378 (Default) / 278 / 3BC / Disabled
Parallel Port Mode
This item allows you to determine how the parallel port should function.
Options: Normal (Default)
EPP
ECP
ECP+EPP
Parallel Port IRQ
This item allows you to select the IRQ for the onboard parallel port.
Options: IRQ7 (Default) / IRQ5
Restore on AC Power Loss
This setting specifies how your system should behave after a power fail or interrupts
occurs. By choosing Disabled will leave the computer in the power off state.
Choosing Enabled will restore the system to the status before power failure or
interrupt occurs.
Options: Power Off (Default) / Power On / Last State
BIOS SETUP UTILITY
[378]
[Normal]
[IRQ7]
[Power Off]
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
8
Allows BIOS to Select
Parallel Port1 Base
Addresses.
Select Screen
Select Item
Change Option
+-
F1 General Help
Save and Exit
F10
ESC Exit