Ide Configuration - Biostar A960G Manual

A960G+ / A960GL+ BIOS Manual

IDE Configuration

The BIOS will automatically detect the presence of IDE/SATA devices. There is a
sub-menu for each IDE/SATA device. Select a device and press <Enter> to enter
the sub-menu of detailed options.
Main
IDE Confuguration
> SATA 1 Device
> SATA 2 Device
> SATA 3 Device
> SATA 4 Device
Hard Disk Write Protect
IDE Detect Time Out (Sec)
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
SATA 1/2/3/4 Device
Main
SATA 1 Device
Device :
LBA/Large Mode
Block (Multi-Sector Transfer)[Auto]
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
The BIOS detects the information and values of respective devices, and these
information and values are shown below to the name of the sub-menu.
BIOS SETUP UTILITY
[Disabled]
[35]
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
4
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
Exit
ESC
Disabled: Disables LBA
Mode.
Auto: Enables LBA
Mode if the device
supports it and the
device is not already
formatted with LBA
Mode disabled.
Select Screen
Select Item
Change Option
+-
F1 General Help
Save and Exit
F10
Exit
ESC