Source; Clock; Auto Clock Mode; Auto Clock Channel - Philips 32PF5321D37 - 32" LCD TV Quick Use Manual

Most of the TV channels do not transmit clock
information. There are a few cable channels who do
but they are at the end of the channel ring. There is
no clock transmission in antenna channels. In such
cases, either clock extraction takes a long time, or
there is no clock.

Source

This menu allows you to name/label the accessory devices you have connected to the
external inputs/outputs.
Select Source in the Setup menu.
&
Press the cursor right to enter the list of types of devices connected to the selected
é
input.
Select the accessory device with the cursor up/down.
"
,
When you select
AV1 AV2
allowing you to identify which type of accessory device is attached to this input.

Clock

This allows you to use your TV as a clock.
Note:
- Adjusting the clock is necessary for the correct working of Lock after (See TV settings, Channels,
p. 17) features.
- Closed captioning will not be displayed when the clock is being displayed. Press the clock
key again to switch off the clock if you want to see closed caption.

Auto clock mode

Select Clock in the Setup menu.
&
Press the cursor right to select the
é
Press the cursor right to instruct the TV to get the time automatically or manually.
"

Auto clock channel

(only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be found by the
TV. Typically time can be found on PBS as well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu
item can not be selected.

Time - Day

(only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If Auto clock mode Manual
the system will keep the entered time and day.

Time zone

(only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time
information will correct the clock display for your local time.
Select Time zone with the cursor down.
&
Press the cursor right to select your local time zone.
é

Daylight saving

(only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals. This menu
item allows you to disable the automatic setting of daylight saving time. This is useful
if you live in an area or state where daylight saving is not applied, but you receive
channels from other areas where daylight saving signals are broadcasted.
Select with the cursor down.
Daylight saving
&
Press the cursor right to select
é
daylight saving time, based on specially broadcasted signals.
Select to disable automatic clock correction based on the specially broadcasted
Off
"
signals.
13
, , ,
Side or Analog Audio In
AV3 HDMI
Auto clock mode .
has been selected, and no clock search has been done,
for automatic clock correction for
Automatic
, a list appears