2264.1 gb
19-12-2003
Source
Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Demo
TV
Setup
Auto demo
Demo
......
Install
Dealer demo - Dig natural motion
14:02
Pagina 9
EXT1
EXT2
EXT3
YPbPr
Centre input
Centre in volume
- Light sensor
- Comb filter
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the v key on the remote
control.
Centre input - Centre in volume
When you have connected a surround receiver
to the TV, see p. 17, the loudspeakers of the TV
can act as centre speaker, making a separate
centre speaker unnecessary.
Select
Centre input On
On
you can adjust the
the cursor left/right to correct volume level
differences of the external audio receiver and
speakers.
The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If
Auto demo
has been selected the demo will
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the Auto
demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note: The Dealer demo is not part of the automatic
sequence and can only be activated separately.
.When having selected
Centre in volume
with
9