Clock; Source - Philips 50PF9956/37 Owner's Manual

Sleep Timer
With the Sleep timer function you can set a time
period after which the TV will turn itself off.
O Select SleepTimer with the cursor down.
O Press the cursor right to set the time
The cursor runs from 0 up to 180 mins
(in S-min increments).
When set to 0, the sleep timer is turned off.
One minute before the sleep timer expires, a
message appears that theTV will turn off in
60 seconds or you may cancel the sleep timer
by pressing the OK button.You can always turn
off your TV earlier or change the set time.
On timer
Note: The On timer function is only available if time
information is available via the local PBS channel.
Select On timer with the cursor down.
Press the cursor right and select On or Off to
set the On timer On or Off.
When you have selected On press the cursor
right.
O Select the TV channel or external source you
want the On timer to activate with the cursor
up/down.
Press the cursor right to select the day you
would like the On timer to become active.
Select Daily to set the On timer for daily
operation on the selected TV channel or
source,
Q Press the cursor right to select AM or PI4.
Press the cursor right to enter the time with
the digit buttons or with the cursor up/down,
left/right.
O Press the OK button to confirm.
Q Press the MENU button to turn off all menus
on screen.
Channels menu
Image Son Options Chaines
,v
Settings
Derno _ Lock after
Install 6 Channel lock
TV ratings lock
Movie ratings lock
Channel remove
(Antenna attenuator)
TV-Y
TV-Y7 (D) Dialogue
--TV-PG (L) Language
TV-14 (S) Sex
TV-MA (V) Violence
Press the cursor right to select Channels.
Select the menu items with the cursor up/down and adjust
the settings with the cursor left/right.
Note: Lock after is only selectable if time and date am known. See
Settings, Clock, p. 8.
13