D-Link DIR-810L User Manual page 86

Section 3 - Configuration
Add Port Filter Rules:
Enable - Check to enable the rule.
Name - Enter a name for your rule.
Dest IP Start - Enter the starting IP address.
Dest IP End - Enter the ending IP address.
Protocol - Select the protocol.
Dest Port Start - Enter the starting port number.
Dest Port End - Enter the ending port number.
Click Next.
To enable Web Access Logging, click Enabled.
Click Save to save the access control rule.
Your newly created policy will now show up under Policy Table.
D-Link DIR-810L User Manual 81