Insignia NS-SP213 Quick Setup Manual

Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Bookshelf Speakers are designed for reliable and trouble-free performance.
Package contents
• Speakers (2)
• Rubber feet (8)
• Rubber feet alignment tool
• Quick Setup Guide
Before using your new product, please read
these instructions to prevent any damage.

Connecting your speakers

Back of speaker
1 Loosen all speaker and amplifier terminals.
2 Strip approximately 1/2" of insulation from the ends of your speaker wire
(not provided).
3 Connect the red (+) speaker terminals to the red (+) amplifier terminals
with your speaker wire, then tighten the terminal connectors.
4 Connect the black (-) speaker terminals to the black (-) amplifier terminals
with your speaker wire, then tighten the terminal connectors.
See the documentation that came with your amplifier or home theater
system for more information on connecting the cables.
Note: For best performance, speaker wires must be connected correctly. All two-conductor
wire is marked in some way to
help with this. One side will be
marked with a colored stripe,
raised rib, or different-color
conductor. Use the marked
side for the "red" connections.
We recommend using
18-gauge or heavier speaker
wire.
Amplifier/home theater system
5-1/4" 2-Way Bookshelf Speakers (Pair)

Positioning your speakers

Optional: Attach the adhesive-backed cushioned feet to
the base of the speakers. Use the rubber feet alignment
tool to help with alignment.
NS-SP213
LEFT RIG Back of
amplifier
Note: Make sure to
connect the + terminal on
the speaker to the
+ terminal on the amplifier
and connect the - terminal
on the speaker to the
- terminal on the
amplifier.
Quick Setup Guide
I NS-SP213
NS-SP213