Samsung UN85S9AF Quick Start Manual page 2

12
Remove the stickers from the top and bottom of TV.
14
Installation Height & Angle Adjustment
1. Using the provided Delphinus, unlock the frame lock on either side of the product's rear middle
as shown.
<TV Screen Lock> <TV Screen Unlock>
2. Refer to the diagram and adjust the height of the TV.
<Diagram 1> Pull the product up slowly while <Diagram 2> Push the product down slowly
holding it at the bottom center. while holding it at the top center.
] When moving the product, make sure there are no small children nearby. In addition, the
improper handling of the product may result in injury.
13
The connectors at both ends of the One Connect cable are different
from each other in shape. When connecting the One Connect cable
to the TV, make sure that the right connector is plugged into the TV.
Otherwise, it may cause product failure.
One Connect
<One Connect-end Connector> <TV-end Connector>
15
Connect One Connect to the TV, and then turn on the TV.
3. When adjusting the height of the TV, make sure the frame ends up in the designated position.
4. Use the DELPHINUS (included) to tighten the locking devices attached to the frame on both sides
and secure the TV in place.
5. Grab the middle part of the top or bottom edge of the product and push or pull to adjust the TV
angle.
Adjustable angles
Front angle:
• When installing the TV, the maximum height is: 2.7 ± 1.0°
• When installing the TV to the minimum height: 7.7 ± 1.0°
Rear angle: 9.5 ± 1.0°
] When adjusting the TV angle, make sure there are no small children nearby. In addition, the
improper handling of the product may result in injury.
Step 2 Connect video devices
We recommend using high speed HDMI connections whenever possible for the best picture quality. Use the included AV adapter to connect older devices.
The displayed image may differ depending on the model.
Connect the cable
Best Connection : HDMI
from the antenna
or cable TV outlet. We suggest using HDMI whenever
possible.
HDMI 1 is the default port for a cable
or satellite set-top box.
The AUDIO OUT
Use the other ports for Blu-ray
port can connect
players, game consoles, and other
to a speaker.
devices.
Good Connection : Component and AV
Connect the IR extender to the IR Connect the IR extender to the IR
Out port to control external devices Out port to control external devices
Match the colors on your device's cables to the colors
connected to the TV using the Smart connected to the TV using the Smart
on the jacks. Connect the yellow composite video out
Touch Control. For more detailed Touch Control. For more detailed
connector from an AV device to the yellow AV IN jack.
information, refer to the "Universal information, refer to the "Universal
Remote Control Setup" section on the Remote Control Setup" section on the
User manual. User manual.
Component
AV
Step 3 Insert the batteries into the remote control
Slightly lift the battery cover using a plastic card.
Check the location of the battery cover groove. The groove's location may vary depending on
the type of Smart Touch Control is provided with the product.
Step 4 Power on and start the initial setup
Information required:
• Wi-Fi network password (if you use one)
• Zip code
• Cable or satellite provider info
The TV must be connected to the Internet to use the Smart Features. If you have a wireless network,
we recommend that you confirm that your network router is switched on and working before you
start the initial setup. If you have a wired network, we recommend that you connect the TV to the
network with a CAT 7 cable before you begin.
Power on to start the initial setup.
Connect to your network (wired or wireless)
Search for channels from
your TV service provider
or
After you have finished the initial setup, you can configure the universal remote control settings.
These settings let the Smart Touch remote control external devices connected to the TV, such as a
set-top box or Blu-ray player.
Congratulations on your new Smart TV!
Wired Ethernet
HDMI Cable
HDMI Port
You can connect home theater
systems to the OPTICAL or AUDIO
OUT ports.
USB Connections
You can connect USB storage devices
to the USB jacks and enjoy personal
photos, videos, and music.
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks
are shown below.
Cable Plugs Ports / Jacks
HDMI
USB
Do not plug cables in upside down.
Be sure to check the orientation of
Optical
Warning the plug before plugging it in.
Troubleshooting
The stand is wobbly or crooked
Make sure the arrows on the stand are properly aligned.
The TV won't turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
My remote, gesture, or voice controls don't work
The TV ships with protective stickers covering some of the sensors. Make sure all of them have been
removed.
I don't know where to plug in <device>
Devices without HDMI may require the included A/V adapter.
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
If you experience issues, please do not take the TV back
to the store.
In the United States of America, call us at
1-800-SAMSUNG (1-800-726-7864) or visit us at www.
samsung.com or www.samsung.com/spsn for support
and warranty service.
For other countries, refer to "Contact SAMSUNG
WORLDWIDE" in the user guide.