Setting The Date (Year-Month-Day/Hour-Minute) - FujiFilm 120 Owner's Manual

1
2
1 2
10
SETTING THE DATE
(YEAR-MONTH-DAY/HOUR-MINUTE)
Your camera can imprint the date or the time on your picture when you make your
exposure. To set your camera for imprinting, first turn on the power and then hold
down the DATE button for at least 2 seconds or longer.
The year signal will blink and the camera will enter the date/time setting mode. You can set:
Year : '00 to '30 (2000 to 2030)
Month : 1 to 12 Day : 1 to 31
Time : 0 to 23 hours; 00 to 59 minutes
1 Press the button to change the blinking setting.
2 Press the DATE button to select the next part of the date/time information.
Each press of the DATE button selects a different element in the date/time information in the
following order:
Year Month Day Hours Minutes