Bluetooth Device Settings - JVC KW-NSX1 Instruction Manual

Bluetooth device settings

Mobile phone
Menu items Selectable setting/item
Connection Connect
♦
Disconnect
♦
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit.
Device Address Shows the MAC address of the unit.
1
Phone Device* Shows the phone device name.
2
Audio Device* Shows the audio device name.
Auto connect ♦ On
♦ Off
HF/Audio Output Select the speakers used for Bluetooth (both phone use and audio player).
Front
♦
♦ All
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list and
call lists.
1
Auto Answer* On
♦
Off
♦
1
SMS Notify* On
♦
♦ Off
1
Ring Mode* System
♦
♦ Phone
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for
1
Change* received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
Call Tone
♦
Message Tone
♦
1
* Appears only for the phone setting screen.
2
* Appears only for <Mode> screen while "BT Audio" is selected as the source.
Bluetooth audio player
On "BT Audio" source control screen:
: ☞ page 52
: ☞ page 52
: The connection is automatically established with the last connected
Bluetooth device when the unit is turned on.
: Cancels.
: From front speakers only.
: From all speakers.
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the calls
manually.
: The unit informs you of the arrival of a message by ringing and
displaying "Receiving Message."
: The unit does not inform you of the arrival of a message.
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not
work depending on the mobile phone.)
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
59
Initial: Underlined