Table of Contents
Advertisement
Having a Private Conversation with
One Participant
When you have two participants in a multi-party session, you
might be necessary to place one of those participants on
hold so that a private conversation can be held with a single
caller. While you are in a multi-party call:
1. Touch Split. The short list of call participants displays
the callers in the order they were dialed.
2. Select the number for the participant in which you
want to speak privately.
You can now talk privately to that person while the
other participants can continue to converse with each
other. If there is only one other participant, that person
is placed on hold.
3. To return to the multi-party call, touch the Join icon.
All of the multi-party call participants can now hear
each other.
Dropping One Participant
If the call is joined:
1. Press Split and highlight the number to split.
2. Press
to drop the call on hold.
Putting a Call on Hold
You can place the current call on hold whenever you want.
You can also make another call while you have a call in
progress if your network supports this service.
To place a call on hold:
Touch Hold.
To make a new call while you have a call in progress:
Touch Dial, then enter the second phone number and
press
.
The first call is automatically placed on hold.
When you have both an active call and a call on hold, you can
switch between the two calls.
To switch between the two calls:
1. Touch either the In call tab, or the On hold tab, and
touch Swap. The active call is placed on hold and the
call on hold is then reactivated so that you can
continue conversing with that person.
2. To finish, end each call normally by pressing
.
Call Functions
47
Advertisement
Table of Contents
