Replacing The I/O Board - Dell Alienware M11x R3 Service Manual

Replacing the I/O Board
1. Follow the instructions in Before You
2. Align the connectors on the I/O board with the slots on the computer base.
3. Use the pull-tab to align the connector on the I/O board with the connector on the system board and press gently.
4. Replace the three screws that secure the I/O board to the computer base.
5. Connect the speaker cable to the connector on the I/O board.
6. Replace the palm rest assembly (see
7. Replace the keyboard (see
8. Replace the hinge cover (see
9. Replace the memory module(s) (see
10. Follow the instructions from
11. Replace the battery pack (see
12. Replace the base cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Palm Rest
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing the Memory Module(s)).
step 6 to step 8 in Replacing the Hard
Replacing the Battery Pack).
Replacing the Base Cover).
Assembly).
Drive.