Set-Up Menu Option - FujiFilm FinePix Z10fd Owner's Manual

[ SET-UP]

SET-UP menu option

Setting
[ IMAGE DISP.]
[ FRAME NO.]
q
[ ILLUMINATION]
[ DIGITAL ZOOM]
[ LCD MODE]
[ DATE/TIME]
[ VOLUME]
[ SOUND]
[ BLOG IMAGE SIZE]
[ LCD BRIGHTNESS]
96
Display Factory default
[3 SEC]/[1.5 SEC]/
[ZOOM
(CONTINUOUS)]
[CONT.]/[RENEW]
[ON]/[OFF]
[ON]/[OFF]
/
–
[SHUTTER VOLUME]/
[OPERATION VOL.]/
[PLAYBACK VOLUME]
[SHUTTER SOUND]/
[START UP SOUND]/
[OPERATION SOUND]
[% STANDARD]/
[$ SMALL]
–
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The color
[1.5 SEC] tones in images recorded may differ from actual
color. Play back the recorded images to check
them.
Specifies whether frame numbers are assigned
[CONT.] consecutively from previous numbers or begin
again.
Sets whether the illumination lamp lights at startup
[ON]
and after shooting is complete.
[OFF] Specifies whether digital zoom is used together.
Sets the LCD monitor display to the fine mode or
power save mode.
– Corrects the date or time.
Sets the volume of shutter volume, operation sound
– and playback volume.
Sets the sound of shutter volume, start up sound
– and operation sound.
Sets the size for blog image when the image is
%
saved or transmitted.
0 Sets the LCD monitor brightness.
How to use the SET-UP menu (➝p.95)
Explanation Page
98
99
100
100
101
23
101
102
73
102